Brake
dust can be defined as the blend of small metal shavings and glued carbon
fibers. Now, this can pit the wheels of your vehicle. If you want to save your
wheels from being ruined then going for a detailing service is essential.
Step
By Step Guide On Hand Car Wash and Detailing Wheels and Tires in Calgary:
Step
1:
Ensure
that you have chosen a suitable cleaner for your wheel. Read the label to know
if it suits the kind of wheels your vehicle has. Now, start with backside of
the wheels. Clean by spraying the wheel cleaner on the backside as well as
tire. Leave it like that so that it can soak well for (3 to 5) minutes.
Step
2:
Take
your preferred car shampoo and then blend it in a bucket containing water. Make
use of your wheel and tire brush and scrub the backside using the blended soapy
water. It is recommended to use the soapy water in good quantity, as the dirt
will be coarse. However, the brush should be properly soaked.
Step
3:
Now,
what you have to do is rinse in detail and then repeat the process. Check if
there are tiny crevices on the wheels then you might require using a
toothbrush. To clean your wheel’s backside, a brush used to clean soft parts
might also work. After cleaning the backside thoroughly, repeat the same
process for the frontal part. Ensure that you have soaked both the sides well.
Step
4:
When
you see the wheel is soaked, spray cleaner on the suspension components and
brake caliper and then let it dry for around 5 minutes. Use a towel made of
cotton to soak the wheel completely.
Step
5:
Now
make use of the left over soapy water as well as the wheel brush for scrubbing
the wheel, suspension components and brake caliper. Try to make it as perfect
as is possible and clean it well for inspection. Dry properly.
Once
you have completed working on one of the wheels, proceed with the next.
Remember that you should clean your wheels and tire one after another.
Wax
The Wheels:
No
sooner, you see the wheels are completely dried up; proceed with polishing.
Steps to be followed:
1. Make
sure that the surface is cool enough and is kept in shade
2. Clean
every wheel in detail
3. Polish
the wheels with a cleansing polish
4. Coat
the surface till it fades away and
5. Clean
using a microfiber towel
